Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
Important
This topic is part of the WiFiCx driver model. WiFiCx is the Wi-Fi driver model released in Windows 11. We recommend that you use WiFiCx to take advantage of the latest features. The previous Wi-Fi driver model WDI is in maintenance mode and will only receive high priority fixes.
The WDI_PHY_TYPE enumeration defines the PHY types.
Syntax
typedef enum _WDI_PHY_TYPE {
WDI_PHY_TYPE_UNKNOWN = 0,
WDI_PHY_TYPE_ANY = 0,
WDI_PHY_TYPE_FHSS = 1,
WDI_PHY_TYPE_DSSS = 2,
WDI_PHY_TYPE_IRBASEBAND = 3,
WDI_PHY_TYPE_OFDM = 4,
WDI_PHY_TYPE_HRDSSS = 5,
WDI_PHY_TYPE_ERP = 6,
WDI_PHY_TYPE_HT = 7,
WDI_PHY_TYPE_VHT = 8,
WDI_PHY_TYPE_DMG = 9,
WDI_PHY_TYPE_HE = 10,
WDI_PHY_TYPE_EHT = 11,
WDI_PHY_TYPE_IHV_START = 0x80000000,
WDI_PHY_TYPE_IHV_END = 0xffffffff
} WDI_PHY_TYPE;
Constants
WDI_PHY_TYPE_UNKNOWNValue: 0 Specifies an unknown or uninitialized PHY type. |
WDI_PHY_TYPE_ANYValue: 0 Specifies an unknown or uninitialized PHY type. |
WDI_PHY_TYPE_FHSSValue: 1 Specifies a frequency-hopping spread-spectrum (FHSS) PHY. |
WDI_PHY_TYPE_DSSSValue: 2 Specifies a direct sequence spread spectrum (DSSS) PHY. |
WDI_PHY_TYPE_IRBASEBANDValue: 3 Specifies an infrared (IR) baseband PHY. |
WDI_PHY_TYPE_OFDMValue: 4 Specifies an orthogonal frequency division multiplexing (OFDM) 802.11a PHY. |
WDI_PHY_TYPE_HRDSSSValue: 5 Specifies a high-rate DSSS (HRDSSS) 802.11b PHY. |
WDI_PHY_TYPE_ERPValue: 6 Specifies an extended-rate 802.11g PHY (ERP). |
WDI_PHY_TYPE_HTValue: 7 Specifies a high-throughput (HT) 802.11n PHY. Each 802.11n PHY, whether dual-band or not, is specified as this PHY type. |
WDI_PHY_TYPE_VHTValue: 8 Specifies a very high-throughput (VHT) 802.11ac PHY. |
WDI_PHY_TYPE_DMGValue: 9 Added in Windows 10, version 1607, WDI version 1.0.21. Specifies a Directional Multi-Gigabit (DMG) 802.11ad PHY. |
WDI_PHY_TYPE_HEValue: 10 Added in Windows 10, version 1809. WDI version 1.1.7. Specifies a High-Efficiency (HE) 802.11ax PHY. |
WDI_PHY_TYPE_EHTValue: 11 Specifies an extremely high-throughput (EHT) 802.11be PHY. |
WDI_PHY_TYPE_IHV_STARTValue: 0x80000000 Specifies the start of the range that is used to define proprietary PHY types that are developed by an independent hardware vendor (IHV). |
WDI_PHY_TYPE_IHV_ENDValue: 0xffffffff Specifies the end of the range that is used to define proprietary PHY types that are developed by an IHV. |
Remarks
The WDI_PHY_TYPE enum is a value in the WDI_TLV_PHY_TYPE_LIST and WDI_TLV_PHY_STATISTICS TLVs.
Requirements
| Requirement | Value |
|---|---|
| Minimum supported client | Windows 11 |
| Minimum supported server | Windows Server 2022 |
| Header | dot11wificxtypes.h |