ESTOU COM DIFICULDADES PARA SOLUCIONAR UM PROBLEMA COM UM DISPOSITIVO QUE INTALEI NO SLOT DO MEU NOTEBOOK SONY VAIO VPCF 130FB, O DRIVE QUE NÃO ENCONTRO É Fresco Logic USB Root Hub, O NOME DO DISPOSITIVO É Fresco Logic xHCI (USB3) Controller FL1100 Series

To resolve the issue with the Fresco Logic xHCI (USB3) Controller FL1100 Series on your Sony Vaio VPCF 130FB running Windows 10, you will need to install the appropriate drivers. Since Windows 10 does not include native support for the Fresco Logic controllers, you will have to download the drivers from the manufacturer’s website or the PC manufacturer’s support page.

Here are the steps you can follow:

1. Identify the Device: Open Device Manager, expand Universal Serial Bus controllers, and check the properties of the Fresco Logic controller to confirm its hardware ID.
2. Download Drivers: Visit the Fresco Logic website or your laptop manufacturer's support page to find and download the latest drivers for the FL1100 Series controller.
3. Install Drivers: Once downloaded, run the installer and follow the on-screen instructions to complete the installation.
4. Restart Your Computer: After installation, restart your computer to ensure the changes take effect.

If the device still does not function properly after installing the drivers, consider connecting it to a USB 2.0 port or contacting the manufacturer for further assistance.

Hey,

I'm very sorry about the problem you're having. Here are some more ways to fix your Fresco Logic USB 3.0 problem.

You can start by allowing Windows Update to install the driver since it often offers a more compatible driver for the FL1100 chipset than older downloads from the manufacturer. Simply go to Settings, then Update & Security, then Windows Update, and install any updates that are available. You can also help by changing your power settings. To do this, open Device Manager, expand USB controllers, open the files for Fresco Logic or USB Root Hub, and turn off the option that lets Windows power them down. If the system is still having problems, the SFC and DISM tools can fix any issues with the files. To do this, open a Command Prompt with admin rights, run "sfc /scannow," then run the three DISM commands, and finally restart the computer. Lastly, try unplugging any other USB devices or deleting software like DisplayLink for a short time, since conflicting USB drivers can sometimes stop the Fresco Logic controller from showing up right.

We can get a better idea of what caused this. After you try the power management settings, does the device show an error code or "Unknown Device" in Device Manager?

Hope this help and hope to heare from you. if you have questions just leave a comment.

Thank you,