Document Intelligence: Copied models not appearing in Document Intelligence Studio

Question

Document Intelligence: Copied models not appearing in Document Intelligence Studio

Richard Jackson 91

Hi there,

Using the Document Models - Copy Model To API call I am able to successfully copy a Custom Extraction Model from a source Document Intelligence resource to a target Document Intelligence resource, copying the source Model to the target Model as defined in the Document Models - Authorize Model Copy API call.

However, because the target Model is never associated with a Project, I am not able to view the target Model in Document Intelligence Studio. I am able to view it through the List Models operation but not check that it is there through the Studio's UI.

Is this correct? Should I be able to view the target Model through Document Intelligence Studio?

Thanks!

Rich

santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-03-19T15:03:39.95+00:00

Hi @Richard Jackson,

You should be able to see the copied model in the target Document Intelligence resource. However, copied models are not automatically associated with a project, which is why they don’t appear in Document Intelligence Studio. Since you've confirmed the model exists in the target resource using the API, you may need to manually associate it with a project in the target instance to make it visible in the Studio UI.

See: copy overview.

Thank you.
Richard Jackson 91 Reputation points

2025-03-19T15:11:46+00:00

Hi @santoshkc - thanks again!

you may need to manually associate it with a project in the target instance to make it visible in the Studio UI

I honestly couldn't find where this would be possible to do! I only seem to be able to view through the APIs. I assumed I should be able to do this but couldn't find how to do so! Any guidance would be greatly appreciated!

Rich
santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-03-21T13:04:16.9733333+00:00

Hi @Richard Jackson,

We haven’t heard from you on the last response and was just checking back to see if the given response was helpful. In case if you have any resolution, please do share that same with the community as it can be helpful to others.

Thank you.
Richard Jackson 91 Reputation points

2025-03-21T13:05:12.2166667+00:00

Ah sorry, I'll check this and get back to you shortly!
Suma ADM. Paluri 0 Reputation points

2025-04-09T08:20:10.07+00:00

Hi all,

I’m also facing a similar situation — the model has been successfully copied to the target resource, but it’s not visible in the Document Intelligence Studio.

I understand that a copied model isn’t automatically associated with a target project. Could this be the reason it's not showing up? If so, what’s the recommended way to resolve this?

Appreciate any guidance or solutions you might have come across.
santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-04-10T08:46:57.4766667+00:00

Hi Suma ADM. Paluri,

I would recommend creating a new thread on the same forum with as much details about your issue as possible. That would make sure that your issue has better visibility in the community.
Jonas Dedual 0 Reputation points

2026-03-30T12:37:08.39+00:00

I have exactly the same issue.

I have copied my model from Westeurope to Switzerlandnorth. This was sucessfull. However, when creating a new Projekt and selecting custom Model, I only get the message "Selected resource doesn't support Neural model training. Click here for details.". I have tried to copy my modell manually and with a powerAutomate Flow. When using a http request, I see that the model is available in switzerlandnorth but there is no way to select it in ui. All suggestions above does not work for me.

Is it even possible to train an ai model in westeurope and then use it in switzerlandnorth?

1 answer

Your answer

santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-03-19T15:03:39.95+00:00

Hi @Richard Jackson,

You should be able to see the copied model in the target Document Intelligence resource. However, copied models are not automatically associated with a project, which is why they don’t appear in Document Intelligence Studio. Since you've confirmed the model exists in the target resource using the API, you may need to manually associate it with a project in the target instance to make it visible in the Studio UI.

See: copy overview.

Thank you.
Richard Jackson 91 Reputation points

2025-03-19T15:11:46+00:00

Hi @santoshkc - thanks again!

you may need to manually associate it with a project in the target instance to make it visible in the Studio UI

I honestly couldn't find where this would be possible to do! I only seem to be able to view through the APIs. I assumed I should be able to do this but couldn't find how to do so! Any guidance would be greatly appreciated!

Rich
santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-03-21T13:04:16.9733333+00:00

Hi @Richard Jackson,

We haven’t heard from you on the last response and was just checking back to see if the given response was helpful. In case if you have any resolution, please do share that same with the community as it can be helpful to others.

Thank you.
Richard Jackson 91 Reputation points

2025-03-21T13:05:12.2166667+00:00

Ah sorry, I'll check this and get back to you shortly!
Suma ADM. Paluri 0 Reputation points

2025-04-09T08:20:10.07+00:00

Hi all,

I’m also facing a similar situation — the model has been successfully copied to the target resource, but it’s not visible in the Document Intelligence Studio.

I understand that a copied model isn’t automatically associated with a target project. Could this be the reason it's not showing up? If so, what’s the recommended way to resolve this?

Appreciate any guidance or solutions you might have come across.
santoshkc 15,615 Reputation points Microsoft External Staff Moderator

2025-04-10T08:46:57.4766667+00:00

Hi Suma ADM. Paluri,

I would recommend creating a new thread on the same forum with as much details about your issue as possible. That would make sure that your issue has better visibility in the community.
Jonas Dedual 0 Reputation points

2026-03-30T12:37:08.39+00:00

I have exactly the same issue.

I have copied my model from Westeurope to Switzerlandnorth. This was sucessfull. However, when creating a new Projekt and selecting custom Model, I only get the message "Selected resource doesn't support Neural model training. Click here for details.". I have tried to copy my modell manually and with a powerAutomate Flow. When using a http request, I see that the model is available in switzerlandnorth but there is no way to select it in ui. All suggestions above does not work for me.

Is it even possible to train an ai model in westeurope and then use it in switzerlandnorth?

Answer 1

santoshkc 15,615 Microsoft External Staff Moderator

Hi @Richard Jackson,

You can make the model visible in the Studio UI by manually copying it within the Models section. To do this, go to Document Intelligence Studio, select the Project, navigate to the Models tab, and select "Copy". Choose the resource and select the model you want to copy. Once the copy process is complete, the model should appear in the Models section of the target instance, making it accessible through the Studio UI.

I hope you understand! Thank you.

0 comments

Share via

Document Intelligence: Copied models not appearing in Document Intelligence Studio

1 answer

Your answer